基于雷诺平均Navier-Stokes方程的表面传热系数计算

采用有限体积法数值求解控制二维绕流的雷诺平均Navier-Stokes(RANS)方程组,计算了光滑和粗糙NACA0012翼型以及圆柱表面的局部表面传热系数.分析了近壁面网格间距、湍流模式和表面粗糙度模型对数值计算结果的影响.结果表明:切应力输运(SST)湍流模型能够区分层流和湍流边界层的对流传热特性,并能预测转捩的发生;采用Spalart-Allmaras(S-A) 扩展模型能够计算粗糙壁面的对流传热系数,但采用忽略转捩函数的S-A模型不能有效计算层流边界层的传热系数.当近壁面网格间距接近10-5量级的黏性子层时,在光滑和粗糙壁面都能得到准确的传热系数分布.结合合适的近壁面网格间距,湍流模式和表面粗糙度模型可以得到与实验数据十分接近的表面传热系数曲线.通过与求解不可压缩RANS方程得到的结果比较后发现,不可压缩RANS方程主要忽略了压缩和黏性耗散效应,这种效应可以通过绝热升温项的形式并入总体热分析.      

基于Krylov子空间法的柔性航天器降阶研究

带大型柔性附件的复杂航天器,其弹性变形通常用有限单元法描述.由于有限元节点坐标数目庞大将会给动力学方程求解和控制策略的实现带来巨大负担,因此对柔性太阳电池阵的动力学模型降阶进行研究.利用单向递推组集推导带太阳电池阵的航天器的刚柔耦合动力学方程,分别采用模态截断法、模态价值分析法和Krylov子空间法对太阳电池阵进行模型降阶,比较不同降阶模型和全有限元模型的动力学仿真结果.仿真结果表明,无论是否考虑大范围运动的影响,采用Krylov方法只需要较低的自由度就可以得到和采用有限元方法完全一致的结果.说明Krylov方法能够有效地降低航天器柔性附件的自由度,提高动力学仿真的效率,便于驱动控制的实现.     

基于BP神经网络的高精度陀螺恒流源补偿方法

为了提高陀螺恒流源精度,提出一种基于BP神经网络的陀螺恒流源补偿方法.采用BP神经网络训练恒流源控制指令与恒流源输出之间的非线性映射稳态模型,以实时估计恒流源输出偏差.设计恒流源控制指令补偿判据,当输出偏差超出设定裕度时,按比例对恒流源控制指令值进行实时补偿,使得恒流源输出更接近控制目标值,以实现更优的精度.通过实物在回路仿真验证了上述方案的有效性,并通过与传统对控制指令进行分段线性标定方法相比较,显示了上述方案的恒流控制优势.     

航天器与空间碎片的混合编队重构控制与应用

针对空间碎片清理问题,提出了一种利用航天器与空间碎片混合编队队形重构控制技术捕获碎片的方法。首先,分析了地/月—日系L2拉格朗日平动点附近的限制性三体环境,并建立了编队卫星相对运动动力学模型;其次,提出了以太阳光压力作为航天器与空间碎片编队队形重构的控制力,实现各从星接近空间碎片的目的;最后,设计了基于线性二次型的最优控制器,并在Matlab/Simulink环境下进行仿真实验。仿真结果表明该方法可控制从星到达期望的位置(空间碎片的位置),且太阳帆板的姿态变化在可控范围内,进而证明了该方案可以应用于复杂空间环境下的碎片清理任务。     

基于动力学递推算法的绳系卫星系统刚柔耦合多体模型

利用动力学递推算法建立了空间绳系卫星系统(TSS)的铰接柔性杆动力学模型.所研究的绳系系统包含两颗刚体绳端卫星和一段连接两颗卫星的柔绳,柔绳离散为一系列球铰连接的弹性杆,考虑杆不均匀的纵向一维形变,并利用球铰的运动模拟柔绳的弯曲和扭转;然后基于递推算法推导得出了该刚柔混合离散模型的动力学方程.数值仿真结果表明:所建立的绳系卫星系统模型能够很好地模拟空间系绳的各向摆振和扭转,此外,递推算法的引入能够有效地减少离散模型动力学方程的维数,从而大幅减少计算量.      

Intra-annual variations of the thermospheric density at 400 km altitude from 1996 to 2006

We investigate the intra-annual variations of globally averaged thermospheric density at 400 km altitude from 1996 to 2006 by using Artificial Neural Network Method (ANNM). The results indicate that thermospheric density is governed by solar activity, and the absolute error of our model is 13.67%, less than NRLMSISE-00 model. Fourier representation can catch the intra-annual variations more accurately than NRLMSISE-00 model and JB2008 model especially during 2002. We find that the Autumn maximum is slightly greater than Spring maximum during solar minimum, while the reverse is correct during solar maximum. There is a strong linear relation between solar activity and the amplitude of annual/semiannual variations, and the correlation coefficients are 0.9534 and 0.9424, respectively. Moreover, the amplitude ratio of the annual to semiannual variation is about 1.3 averaged, and changes in different years, but it has little relation with solar activity. Besides that, the amplitude of annual variation is larger than semiannual variation during 1996 and 2006 except 1998 and 2000. The relative error of NRLMSISE-00 model is 14.95%, decreasing to 12.49% after revising, and the correlation coefficients between this empirical model and its improved results and the observation are 0.8185 and 0.9210, respectively. Finally, we suggest the revised version of MSIS series of model should use the Fourier representation to express the intra-annual variations.     

Method for the prediction of the effective dose equivalent to the crew of the International Space Station

This paper describes a methodology for assessing the pre-mission exposure of space crew aboard the International Space Station (ISS) in terms of an effective dose equivalent. In this approach, the PHITS Monte Carlo code was used to assess the particle transport of galactic cosmic radiation (GCR) and trapped radiation for solar maximum and minimum conditions through an aluminum shield thickness. From these predicted spectra, and using fluence-to-dose conversion factors, a scaling ratio of the effective dose equivalent rate to the ICRU ambient dose equivalent rate at a 10 mm depth was determined. Only contributions from secondary neutrons, protons, and alpha particles were considered in this analysis.     

A comprehensive numerical model investigating the thermal-dynamic performance of scientific balloon

The increase of balloon applications makes it necessary for a comprehensive understanding of the thermal and dynamic performance of scientific balloons. This paper proposed a novel numerical model to investigate the thermal and dynamic characteristics of scientific balloon in both ascending and floating conditions. The novel model consists of a dynamic model and thermal model, the dynamic model was solved numerically by a computer program developed with Matlab/Simulink to calculate the velocity and trajectory, the thermal model was solved by the Fluent program to find out the balloon film temperature distribution and inner Helium gas velocity and temperature field. These models were verified by comparing the numerical results with experimental data. Then the thermal and dynamic behavior of a scientific balloon in a real environment were simulated and discussed in details.     

View-dependent progressive transmission and rendering for lunar model based on bicubic subdivision-surface wavelet

Given the fact that the back of the digital lunar model is invisible from any viewpoint, a view-dependent progressive transmission and rendering method for lunar model is proposed and a client-server browsing system is implemented. On the server side, the semi-regular lunar surface is partitioned into dozens of segments, and each segment is compressed independently using bicubic subdivision-surface wavelet and SPIHT. For any viewpoint, only the data of the visible segments are transmitted to the client side progressively, then decoded and locally reconstructed there. This approach not only improves the efficiency of transmission, but also reduces the reconstruction time greatly. We can browse the lunar model on the client almost in realtime.